KAC-827
2-Channel Power Amplifier
Suggested Retail Price: $280 - $350

Key Features

• Maximum Output Power: 600 Watts x 1

• Bridged Power Output at 14.4V: 300 Watts x 1 (less than 0.8% THD, 1kHz)
• Maximum Output Power: 600 Watts x 1
• Power Output at 2 Ohms, at 14.4V: 150 Watts x 2 (less than 0.8% THD, 1kHz)
• Power Output at 4 Ohms, at 14.4V: 85 Watts x 2 (less than 0.08% THD, 20Hz - 20kHz)
• Bridged Power Output at 14.4V (1kHz, 0.8% THD): 300 Watts x 1
• Power Output at 2 Ohms, at 14.4V (1kHz, 0.8% THD): 150 Watts x 2
• Power Output at 4 Ohms, at 14.4V (20Hz-20kHz, 0.08% THD): 85 Watts x 2

• Damping Factor: 200
• Frequency Response: 5Hz - 50kHz (+0dB, -3dB)
• High-Pass Filter Frequency: 50Hz - 200Hz, 12dB per Octave (Variable)
• Infrasonic Filter Frequency: Off/25Hz, 18dB per Octave
• Input Impedance: 10kOhms
• Input Sensitivity: 0.2V - 5V
• Low-Pass Filter Frequency: 50Hz - 200Hz, 18dB per Octave (Variable)
• Signal-to-Noise Ratio: 105dB (1kHz)

• 2-Ohm Stable
• Copper-Shielded EE Core Transformer
• Glass Epoxy Printed Circuit Board
• Large Secondary Capacitors
• Large Toroidal Noise Suppression Filter
• Power Indicator: 2-Color: Power, Protection
• Power Input Terminals: Gold-Plated, Large Screw-Type
• Power MOSFET Switching Power Supply

• Current Consumption (Maximum): 23A
• Operating Voltage: 12V (11V - 16V allowable)

• Balanced Isolation Circuit
• Glass Epoxy Printed Circuit Board
• Parallel RCA Inputs/Outputs: Gold-Plated
• Quiet Turn-On
• Selectable Balanced Line Input
• Selectable Infrasonic Filter
• Sigma Drive
• Speaker Connectors: Gold-Plated, Screw-Type
• Speaker Relay Protection
• Stereo, Mono, or Tri-Mode Operation
• Variable High-Pass Electronic Crossover: 50Hz - 200Hz, 12dB per Octave
• Variable Low-Pass Electronic Crossover: 50Hz - 200Hz, 18dB per Octave

• Width : 10-11/16"
• Height : 2-5/16"
• Depth : 10-5/8"
• Weight : 9.4 lb

Created & Maintained by: Adam L. Caskey
Copyright ©1998-2007 Adam L. Caskey, All Rights Reserved